Pro/Forums - View Single Post

blue68f100 · 02-16-2006, 09:41 PM

Have you replace the drive?
10000 is the main drive.

What options does the web interface gives you in the disk utility?
You are going to need to replace the drive, and rebuild, or change the configuration to JBOD. JBOD will allow you to use it with one drive.

The 2200 will boot from either drive.

02-16-2006, 09:41 PM	#6
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Rebuilding 2200 after failed stripe? Have you replace the drive? 10000 is the main drive. What options does the web interface gives you in the disk utility? You are going to need to replace the drive, and rebuild, or change the configuration to JBOD. JBOD will allow you to use it with one drive. The 2200 will boot from either drive. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820