Pro/Forums - View Single Post

blue68f100 · 02-20-2006, 08:38 AM

Fan,
Knew some one would ask for that. Finally found what I put in. The fan was made by ebm industries. PN 5912-612F, 60x15mm 17.1cfm, 3900rpm, 27db. Got it from Mouser. The original was 3700rpm, 28db, 13.5cfm. I replaced the drives at the same time. The unit is a little louder than it was. Don't know if it was due to the fan or new drives. One if the mount holes cracked on me whin I installed it. But their is a big difference in air frow. You can feel it blowing. As for the noise, not bad, maybee I will hear it this time if something fails. My 2000 was so quite, you couldn't even tell if it was on, if it wasn't for the lights.

02-20-2006, 08:38 AM	#4
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: HUGE drives in Snap 2200 Fan, Knew some one would ask for that. Finally found what I put in. The fan was made by ebm industries. PN 5912-612F, 60x15mm 17.1cfm, 3900rpm, 27db. Got it from Mouser. The original was 3700rpm, 28db, 13.5cfm. I replaced the drives at the same time. The unit is a little louder than it was. Don't know if it was due to the fan or new drives. One if the mount holes cracked on me whin I installed it. But their is a big difference in air frow. You can feel it blowing. As for the noise, not bad, maybee I will hear it this time if something fails. My 2000 was so quite, you couldn't even tell if it was on, if it wasn't for the lights. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820