Pro/Forums - View Single Post

blue68f100 · 02-21-2006, 08:14 AM

I tried a 20mm before, it was into the drives. So I had to drop back to the 15mm like the original. I really think the coolling in the 2200 is ok. These shipped with 7200rpm drives from the factory. And since most mfg have switched over to the FDB (fluid dynamic bearings) the drives run cooler than they did 3-5 yrs ago.

02-21-2006, 08:14 AM	#9
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: HUGE drives in Snap 2200 I tried a 20mm before, it was into the drives. So I had to drop back to the 15mm like the original. I really think the coolling in the 2200 is ok. These shipped with 7200rpm drives from the factory. And since most mfg have switched over to the FDB (fluid dynamic bearings) the drives run cooler than they did 3-5 yrs ago. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820