Pro/Forums - View Single Post

blue68f100 · 02-21-2006, 01:41 PM

rmoody,

These controller boards can also be used in the 4000's. And some users have done just that. But that a different ball of wax. Have you tried replacing the ide cable. Is your's 40 or 80 cond? My 2000 power connectors were pretty loose, I don't know if the heat cause this. It was the cause of one of my drives not spinning up.

Are you using RAID 1? If so you could use dd to copy the image on the good hd to the second.

02-21-2006, 01:41 PM	#9
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Quantum 2000 won't see second drive rmoody, These controller boards can also be used in the 4000's. And some users have done just that. But that a different ball of wax. Have you tried replacing the ide cable. Is your's 40 or 80 cond? My 2000 power connectors were pretty loose, I don't know if the heat cause this. It was the cause of one of my drives not spinning up. Are you using RAID 1? If so you could use dd to copy the image on the good hd to the second. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820