View Single Post
Unread 02-21-2006, 09:36 PM   #1036
blue68f100
Thermophile
 
blue68f100's Avatar
 
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
Default Re: Hack a Snap Sever 1000?

Poogles,

It looks like something is hapening with JVM reporting unknown. May need to reinstall the OS and JVM again.

mmd30,

Your not the first one to get caught with a reboot. The rapid flashing is panic mode. I think what has worked is ???? oh yea, Do a factory reset, soon as the system light blinks 5/sec panic, turn the snap off with the power button (press hold). Restart after 1 min. Start assist, the unit may still go in panic mode, leave assist running it may take up to 1 hr till it times out and show up with assist. Connect with assist and change your bios setting back.

Loading JVM requires a min of 24 meg to, if you do not have a min of 64 meg, pref 128 to run properly. It all depends on what it is going on.

You failed to mention what you are working on, 1000 with 32 meg.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5,
1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5,
1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy

Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820
blue68f100 is offline   Reply With Quote