Pro/Forums - View Single Post

blue68f100 · 02-26-2006, 08:45 AM

My 2200 PS is made by E.P.S. Inc. Model #F1670K Output 12vDC, 3.5amps. The Plug for a 1000 is 5 1/2mm OD x 2mm ID. I hope this helps. I have a 1000 here needing repair, the person did not have the original PS, 12vDC 2.5Amps. The plug deminisions given were from the 1000, which I'm pretty sure the 1000 and 2200 are the same. The power supply for the 1000 may have a lower rating due to only one drive.

02-26-2006, 08:45 AM	#1056
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Hack a Snap Sever 1000? My 2200 PS is made by E.P.S. Inc. Model #F1670K Output 12vDC, 3.5amps. The Plug for a 1000 is 5 1/2mm OD x 2mm ID. I hope this helps. I have a 1000 here needing repair, the person did not have the original PS, 12vDC 2.5Amps. The plug deminisions given were from the 1000, which I'm pretty sure the 1000 and 2200 are the same. The power supply for the 1000 may have a lower rating due to only one drive. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820