Pro/Forums - View Single Post

blue68f100 · 03-08-2006, 08:13 AM

It may just be complaining about no drives. Do a favtory reset to clear PW and net settings. Install 1 drive in the drive 1 slot, jumper set as MASTER. Max <137gig). Powerup. The 4100 stores OS in Flash ram. So it will format the drive and install the OS. You will need to use the ASSIST program to locate the snap and set it up. If you need Assist or instruction on how to reset let me know.

You should be able to connect with out drives installed.

03-08-2006, 08:13 AM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: M4100 and amber disk lights It may just be complaining about no drives. Do a favtory reset to clear PW and net settings. Install 1 drive in the drive 1 slot, jumper set as MASTER. Max <137gig). Powerup. The 4100 stores OS in Flash ram. So it will format the drive and install the OS. You will need to use the ASSIST program to locate the snap and set it up. If you need Assist or instruction on how to reset let me know. You should be able to connect with out drives installed. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820