Pro/Forums - View Single Post

blue68f100 · 03-27-2006, 04:19 PM

Good for you for having a BU. Running Raid0 (Stripped) has no redunducy. If the unit still boots, look at the error log. The top disk is 10000, with the lower 10010. The Strip is 40000. Error will show on 40000 and on one drive.

Data is not recoverable from a RAID 0 failure.

The 2200 is advertised as bootable from ether drive, but I think this only applies to RAID 1.

The OS is stored on the HD. The easiest way to move up to 300 gig drives, would to copy the boot tracks from your good drive to your new ones. This is best done with dd from the Knoppix CD.

To find out what your current OS, HW ... version is, clink on the SnapAppliance Logo from the admin web page. A popup window will apear with the info.

03-27-2006, 04:19 PM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Rebuild Snap 2200 with Raid 0 Good for you for having a BU. Running Raid0 (Stripped) has no redunducy. If the unit still boots, look at the error log. The top disk is 10000, with the lower 10010. The Strip is 40000. Error will show on 40000 and on one drive. Data is not recoverable from a RAID 0 failure. The 2200 is advertised as bootable from ether drive, but I think this only applies to RAID 1. The OS is stored on the HD. The easiest way to move up to 300 gig drives, would to copy the boot tracks from your good drive to your new ones. This is best done with dd from the Knoppix CD. To find out what your current OS, HW ... version is, clink on the SnapAppliance Logo from the admin web page. A popup window will apear with the info. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820