Pro/Forums - View Single Post

blue68f100 · 03-31-2006, 10:09 PM

Lets say 1 out of 1000 works. Pretty bad odds. Only one person got the right combo. A little insite. I think the snap os looks at the serial no as well as platform bytes to know what it is suppose to be. The reason for failure. A 1000v2 is an early model of the 1100. The 1100 is the only model that uses the same file set as a 2200. The 1000 is all by it self. Shares no files with other models. The reason for failure.

If you are set on trying there is a auto reboot in the same section. set to manual. So you can get all of your settings set, without it re-booting on you, till you are ready.

If it boots and comes up with the sys and disk led flash together once then the disk led blinks twice. YOU NOW HAVE A DOOR STOP.

03-31-2006, 10:09 PM	#16
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Upgrading "Snap 1000" specifically Lets say 1 out of 1000 works. Pretty bad odds. Only one person got the right combo. A little insite. I think the snap os looks at the serial no as well as platform bytes to know what it is suppose to be. The reason for failure. A 1000v2 is an early model of the 1100. The 1100 is the only model that uses the same file set as a 2200. The 1000 is all by it self. Shares no files with other models. The reason for failure. If you are set on trying there is a auto reboot in the same section. set to manual. So you can get all of your settings set, without it re-booting on you, till you are ready. If it boots and comes up with the sys and disk led flash together once then the disk led blinks twice. YOU NOW HAVE A DOOR STOP. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820