Pro/Forums - View Single Post

blue68f100 · 04-11-2006, 04:00 PM

1000v2, 1100, 2000v2, 2200 all use the same image file. More than likely the image that you copied was not placed in the boot sector. Use a utility and wipe the MBR with "0" or a quick fat32 format. and try again. Remember you need to copy 25 meg, so make sure block size was correct (1024k) with count = 25, = 25 meg.

04-11-2006, 04:00 PM	#6
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 1000 Blinking LED Problem 1000v2, 1100, 2000v2, 2200 all use the same image file. More than likely the image that you copied was not placed in the boot sector. Use a utility and wipe the MBR with "0" or a quick fat32 format. and try again. Remember you need to copy 25 meg, so make sure block size was correct (1024k) with count = 25, = 25 meg. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820