Pro/Forums - View Single Post

blue68f100 · 04-21-2006, 01:03 PM

The disk utility section should tell you.

Another way is the capacity of the mounted drive is = to the capacity of each drive added together - overhead ( 80+80=130). The fat table is only on the first drive.

Raid 1 just one drive shows (mirror).
JBOD has 2 seperate mount points.

04-21-2006, 01:03 PM	#4
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: snap drive fatal error The disk utility section should tell you. Another way is the capacity of the mounted drive is = to the capacity of each drive added together - overhead ( 80+80=130). The fat table is only on the first drive. Raid 1 just one drive shows (mirror). JBOD has 2 seperate mount points. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820