Pro/Forums - View Single Post

blue68f100 · 04-22-2006, 06:32 PM

4.0.860 (patch) adds MS AD support ONLY. If you are moving up from v3 you need to install the full version 4.0.830 first.

LB48bit IS NOT SUPPORTED on the 4100. It has a hardware problem with the promise controllers. There is no way around this, believe me we have tried.

v4 requires slighly more overhead than v3. It is recomended that you have a minimum of 128 meg for better performance.

04-22-2006, 06:32 PM	#27
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 4100 BIOS dump, unlocking 137 limit 4.0.860 (patch) adds MS AD support ONLY. If you are moving up from v3 you need to install the full version 4.0.830 first. LB48bit IS NOT SUPPORTED on the 4100. It has a hardware problem with the promise controllers. There is no way around this, believe me we have tried. v4 requires slighly more overhead than v3. It is recomended that you have a minimum of 128 meg for better performance. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820