Pro/Forums - View Single Post

blue68f100 · 05-30-2006, 05:38 PM

Ok,

Received resonse from Seagate and Hitachi.

Seagate said NO on PATA drives there is something for SATA.

Hitachi Said YES ......BUT .... It must receive a signal from the controller (BIOS or Software) to start up. Here is the link for jumper setup if someone has Hitachi drives installed to test. http://www.hgst.com/hdd/support/7k400/7k400jum.htm

05-30-2006, 05:38 PM	#10
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 705N/4100 lives and thrives! Ok, Received resonse from Seagate and Hitachi. Seagate said NO on PATA drives there is something for SATA. Hitachi Said YES ......BUT .... It must receive a signal from the controller (BIOS or Software) to start up. Here is the link for jumper setup if someone has Hitachi drives installed to test. http://www.hgst.com/hdd/support/7k400/7k400jum.htm __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820