Pro/Forums - View Single Post

blue68f100 · 06-20-2006, 07:39 AM

If you have the apple flag turned on in the setup, and that didn't help. Apple will read the UFS. Make sure its on. Just access the snap with out any special syn text. My OSX skill are a little low. I only have 3 cients that have the latest OS. With the older OS v8.6-9, I would just use finder and enter the IP addess of the snap. Have it save the settings (alias). It worked with out a problem. And I did that with my brothers 21" PowerBook (OSX).

The light flashing rapidly is a PANIC ALARM, meaning the unit is have a major problem, these are not good. Make sure the cooling fan is working. Open up and reseat the ram and the cpu.

06-20-2006, 07:39 AM	#167
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap OS 3.4.805, anyone? If you have the apple flag turned on in the setup, and that didn't help. Apple will read the UFS. Make sure its on. Just access the snap with out any special syn text. My OSX skill are a little low. I only have 3 cients that have the latest OS. With the older OS v8.6-9, I would just use finder and enter the IP addess of the snap. Have it save the settings (alias). It worked with out a problem. And I did that with my brothers 21" PowerBook (OSX). The light flashing rapidly is a PANIC ALARM, meaning the unit is have a major problem, these are not good. Make sure the cooling fan is working. Open up and reseat the ram and the cpu. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 Last edited by blue68f100; 06-20-2006 at 07:45 AM.