Pro/Forums - View Single Post

blue68f100 · 06-23-2006, 12:45 PM

There is a reset procedure to clear the admin password. Do you need a copy of the admin manual and reset procedures?

What is special about 3.4.807 compaired to 805 did they say?

12.5 Meg/sec is the max for 100mbps over IP. The RAID 5 will generally max it out.

These unit use DIMM's chip PC66/100, I think some users said they needed the low profile. Issue "debug memory" from debug to get full detail on installed ram.

The over size drives should not cause any problem.

Your example is a home built NAS/serverpc running RAID 0, and SNMP is having a problem too. I would edit that post and clean it out, it really doesn't apply to the snaps.

06-23-2006, 12:45 PM	#73
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 705N/4100 lives and thrives! There is a reset procedure to clear the admin password. Do you need a copy of the admin manual and reset procedures? What is special about 3.4.807 compaired to 805 did they say? 12.5 Meg/sec is the max for 100mbps over IP. The RAID 5 will generally max it out. These unit use DIMM's chip PC66/100, I think some users said they needed the low profile. Issue "debug memory" from debug to get full detail on installed ram. The over size drives should not cause any problem. Your example is a home built NAS/serverpc running RAID 0, and SNMP is having a problem too. I would edit that post and clean it out, it really doesn't apply to the snaps. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820