Pro/Forums - View Single Post

blue68f100 · 08-09-2006, 07:39 AM

JVM is for the larger Snap Units with a min of 128meg. It requies an minimum of 24meg to even load.

Make sure you get a HD that is not EIDE (ata133). Stick with the std IDE ATA100 and you want have a problem.

You need to test to see if you can access the web interface with out a hd. If so the os is stored in flashram. If not you will need to use dd to copy the boot tracks form your working drive. The instruction for this can be found in the wiki section.

08-09-2006, 07:39 AM	#5
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: SnapServer 1000 JVM is for the larger Snap Units with a min of 128meg. It requies an minimum of 24meg to even load. Make sure you get a HD that is not EIDE (ata133). Stick with the std IDE ATA100 and you want have a problem. You need to test to see if you can access the web interface with out a hd. If so the os is stored in flashram. If not you will need to use dd to copy the boot tracks form your working drive. The instruction for this can be found in the wiki section. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 Last edited by blue68f100; 08-09-2006 at 07:45 AM.