Pro/Forums - View Single Post

blue68f100 · 09-07-2006, 03:25 PM

The 2000 has 1 screw in the back by the fan. Have the LED side down. remove the top screw. The slide the top 1/2 toward the front, about 1/2" then remove. If SIMM's Memory v1.

The 2200 has 2? screws holding in the drive/MB assembly to the case. Adaptec/Snap has a document show how it comes apart. Easy compaired to the 2000.

09-07-2006, 03:25 PM	#16
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap Server 2200 connectivity issues? The 2000 has 1 screw in the back by the fan. Have the LED side down. remove the top screw. The slide the top 1/2 toward the front, about 1/2" then remove. If SIMM's Memory v1. The 2200 has 2? screws holding in the drive/MB assembly to the case. Adaptec/Snap has a document show how it comes apart. Easy compaired to the 2000. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820