View Single Post
Unread 09-28-2006, 08:03 AM   #3
blue68f100
Thermophile
 
blue68f100's Avatar
 
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
Default Re: SNAP 4000 Errors and Limits

If I recall the 4 x 400 gig is using a 3disk array with 1 spare.


Dell's site mentioned that the Snap uses 1/4 of its ram for disk caching. If JVM is not used this can be adjusted up. But there was a small problem that the snap did not like the value he entered and re-adjusted it, which is a good thing.

So far it has thaken the same amount of time to resync after a failure as it did to build the array originally with 100+gig of data on the snap.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5,
1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5,
1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy

Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820
blue68f100 is offline   Reply With Quote