Pro/Forums - View Single Post - Unknown Disk Operation Error (4100 & 705N)

blue68f100 · 10-06-2006, 05:43 PM

Check to see if the Maxtor's drive is a ATA133. Snaps have a history of not playing well with this interface. If so see if the maxtor's utilities gives you an option to set the speed.

You may also try setting the jumpers to single drive. I think it gives you that option besides master/slave/CS.

10-06-2006, 05:43 PM	#8
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Unknown Disk Operation Error (4100 & 705N) Check to see if the Maxtor's drive is a ATA133. Snaps have a history of not playing well with this interface. If so see if the maxtor's utilities gives you an option to set the speed. You may also try setting the jumpers to single drive. I think it gives you that option besides master/slave/CS. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820