Pro/Forums - View Single Post

blue68f100 · 10-26-2006, 02:33 PM

Open the unit and record the the drive info. You will need a drive that the usable capacity is = to or > than but not more the 2%. Drive 1 is useded to calculate the RAID 5 capacity. SO try to get the same drive with the same firmware.

I would wait till djontz and phoenix32 looks at the load and confirm my findings. It is posiable that you have a mix of drives. With drive 1 being criticle to the units health.

As far as upgrading stick with 120's

bug i'm in plano if you havn't noticed.

10-26-2006, 02:33 PM	#12
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: What is my 4100 doing! Open the unit and record the the drive info. You will need a drive that the usable capacity is = to or > than but not more the 2%. Drive 1 is useded to calculate the RAID 5 capacity. SO try to get the same drive with the same firmware. I would wait till djontz and phoenix32 looks at the load and confirm my findings. It is posiable that you have a mix of drives. With drive 1 being criticle to the units health. As far as upgrading stick with 120's bug i'm in plano if you havn't noticed. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820