Pro/Forums - View Single Post

blue68f100 · 11-10-2006, 12:44 PM

You will need to remove all drives but drive 1.

Then issue "co de format 10000 /reinit"

Then check you capacity is should be good to go.

If this is a 4000, change disk type to JBOD

Install the other drives.

Issue "co de format xxxxxx /reinit" where xxxxx is 10008, 10010, 10018 to reformat the remianing drives.

11-10-2006, 12:44 PM	#15
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap Server Boot Image You will need to remove all drives but drive 1. Then issue "co de format 10000 /reinit" Then check you capacity is should be good to go. If this is a 4000, change disk type to JBOD Install the other drives. Issue "co de format xxxxxx /reinit" where xxxxx is 10008, 10010, 10018 to reformat the remianing drives. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820