Pro/Forums - View Single Post

blue68f100 · 11-12-2006, 12:37 PM

The fan is a 60 x 60 x 15mm, PN ABF0612LB 3200 rpm 0.1Amp. This is a low speed, Quite 24 dba fan. I moved up to the medium speed fan and it is louder. I lost one unit due to a fan failure. So hearing it a little bit does not bother me, provided it is not over 30 dba.

The limiting factor will be the power supply. But a lot of the newer drives use less power than the older ones. I have 2 300gigs in mine. I have seen some listed on ebay with 2 500gig (1T). Of course your OS must support it.

The limiting factory is the OS. It can not handle any raid > 1T. Some will argue this, but at this time larger cap 4000 are having problems.

11-12-2006, 12:37 PM	#8
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Where can I fine SnapOS v4? The fan is a 60 x 60 x 15mm, PN ABF0612LB 3200 rpm 0.1Amp. This is a low speed, Quite 24 dba fan. I moved up to the medium speed fan and it is louder. I lost one unit due to a fan failure. So hearing it a little bit does not bother me, provided it is not over 30 dba. The limiting factor will be the power supply. But a lot of the newer drives use less power than the older ones. I have 2 300gigs in mine. I have seen some listed on ebay with 2 500gig (1T). Of course your OS must support it. The limiting factory is the OS. It can not handle any raid > 1T. Some will argue this, but at this time larger cap 4000 are having problems. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820