Pro/Forums - View Single Post

blue68f100 · 11-20-2006, 01:30 PM

Not having a 4100, I think you should be able to move the drive 2 over to the drive 1 position. It will miss the raid5 setup, just rebuild a new array once all the drives are in place. If the Language is missing you need a full OS (sup) file to reinstall the missing files.

Or if that doesn't work use the dd instruction in the wiki section and copy the old drive to the new, then reinit the drive.

11-20-2006, 01:30 PM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Sorry another 4100 newbie question Not having a 4100, I think you should be able to move the drive 2 over to the drive 1 position. It will miss the raid5 setup, just rebuild a new array once all the drives are in place. If the Language is missing you need a full OS (sup) file to reinstall the missing files. Or if that doesn't work use the dd instruction in the wiki section and copy the old drive to the new, then reinit the drive. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820