Pro/Forums - View Single Post - 4100

blue68f100 · 11-28-2006, 06:01 PM

It would be better to find a dead board and read the bios from it. But it would have to be de-soldered without damaging it. I have the TSOP-40 socket to read the flashram with my programmer.

Then someone with BIOS knowledge would have to re-program it. That will be the hard part.

There was a utility to upgrade the bios in the early 2000 (v1). Don't know if it could be used to load a 4100.

11-28-2006, 06:01 PM	#13
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: 4100 - LBA48 support It would be better to find a dead board and read the bios from it. But it would have to be de-soldered without damaging it. I have the TSOP-40 socket to read the flashram with my programmer. Then someone with BIOS knowledge would have to re-program it. That will be the hard part. There was a utility to upgrade the bios in the early 2000 (v1). Don't know if it could be used to load a 4100. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820