Pro/Forums - View Single Post

blue68f100 · 12-14-2006, 12:16 PM

All of the problems indicates that you may have a drive having problem with seeks, and or bad media. I would run GRC SpinRite v6 on all of the drives. I did this when mine were new. I have 1 drive that has used up 1/2 of the allowed spare sectors. All other checked good. I expect the drive to fail in a short period of time. The Smart Tech built in to the HD will do this on the fly. May be the source of all your problem.

Disable JVM if you do not have it installed.

12-14-2006, 12:16 PM	#8
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 4100 Slow after Rebuild All of the problems indicates that you may have a drive having problem with seeks, and or bad media. I would run GRC SpinRite v6 on all of the drives. I did this when mine were new. I have 1 drive that has used up 1/2 of the allowed spare sectors. All other checked good. I expect the drive to fail in a short period of time. The Smart Tech built in to the HD will do this on the fly. May be the source of all your problem. Disable JVM if you do not have it installed. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 Last edited by blue68f100; 12-14-2006 at 12:57 PM.