Pro/Forums - View Single Post - Bunna o-ring channel depth??

blue68f100 · 01-26-2007, 07:27 PM

Without a Parker O ring hand book handy, I think you only need around 0.025" - 0.050" for a static seal and this may be too much. You are not looking at high pressure. You need to use a low duromoter compound (60-70 or less), you will find it easy to assemble and seal.

01-26-2007, 07:27 PM	#6
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Bunna o-ring channel depth?? Without a Parker O ring hand book handy, I think you only need around 0.025" - 0.050" for a static seal and this may be too much. You are not looking at high pressure. You need to use a low duromoter compound (60-70 or less), you will find it easy to assemble and seal. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820