Pro/Forums - View Single Post

blue68f100 · 02-26-2007, 06:35 PM

Before you do anything backup all your data.
Ok you have a 4100 with 2 x raid 1 setup. With a bad hd, 50008. Should be drive 2, is the led on the front indicating a fault?

I need you to run "co de info" from debug. (Need to look at some drive info.)
Have you every upgraded the OS?
Have you checked to see if your MB has been repaired? (Sticky at the top of the thread.) If yours came as a 320gig the repairs should have been done at the factory.

All of these can effect data integerity.

02-26-2007, 06:35 PM	#3
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Both drives in RAID 1 set failed!? Before you do anything backup all your data. Ok you have a 4100 with 2 x raid 1 setup. With a bad hd, 50008. Should be drive 2, is the led on the front indicating a fault? I need you to run "co de info" from debug. (Need to look at some drive info.) Have you every upgraded the OS? Have you checked to see if your MB has been repaired? (Sticky at the top of the thread.) If yours came as a 320gig the repairs should have been done at the factory. All of these can effect data integerity. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820