Pro/Forums - View Single Post

blue68f100 · 03-09-2007, 07:20 AM

Assist should only be used for doing the initial setup. And maybe doing an OS Update. Everything else should be done through the GUI.

Assist uses a special protocol written specificly for snaps. This is used to loacte them when the IP address has not be set 0.0.0.0 . No other utility will find them if it IP is 0.0.0.0 . The Guardian units have a fallback to 10.10.10.10 if a dhcp server is not found.

03-09-2007, 07:20 AM	#4
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Assist Parameters Assist should only be used for doing the initial setup. And maybe doing an OS Update. Everything else should be done through the GUI. Assist uses a special protocol written specificly for snaps. This is used to loacte them when the IP address has not be set 0.0.0.0 . No other utility will find them if it IP is 0.0.0.0 . The Guardian units have a fallback to 10.10.10.10 if a dhcp server is not found. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820