Pro/Forums - View Single Post

blue68f100 · 03-14-2007, 12:23 PM

Phoenix32 was looking at that. The 2000v1 also has it. I was informed by a snap tech that it was disabled to free up resources. But to my knowledge no one has tested to see if its actually dead. Use a Null Modem cable and Hyterminal to capture the data. If you get anything you may need to play with the port settings to mkae it readable.

03-14-2007, 12:23 PM	#3
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap4000 Com1 port Phoenix32 was looking at that. The 2000v1 also has it. I was informed by a snap tech that it was disabled to free up resources. But to my knowledge no one has tested to see if its actually dead. Use a Null Modem cable and Hyterminal to capture the data. If you get anything you may need to play with the port settings to mkae it readable. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820