Pro/Forums - View Single Post - logical set 60000, error -1

blue68f100 · 03-30-2007, 03:47 PM

What you need to do is break the array. Then from debug issue "co de format XXXXX /reinit" . Where XXXXX is the drive ID's, 10000, 10008, 10010, 10018. Then recheck the starting points all should be the same and capacity may differ. If so the smallest drive must be in position 1.

03-30-2007, 03:47 PM	#24
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: logical set 60000, error -1 What you need to do is break the array. Then from debug issue "co de format XXXXX /reinit" . Where XXXXX is the drive ID's, 10000, 10008, 10010, 10018. Then recheck the starting points all should be the same and capacity may differ. If so the smallest drive must be in position 1. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820