Pro/Forums - View Single Post - Problems with failure on a 2000 model in mirror mode

blue68f100 · 04-01-2007, 01:27 PM

The fan is temp controlled on v2's.

Have you tried a reset to factory? Then assist to do the basic setup.

If you have a spare drive any size Install it as master and see if the snap will setup a new drive. If not you have a HW problem.

04-01-2007, 01:27 PM	#13
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Problems with failure on a 2000 model in mirror mode The fan is temp controlled on v2's. Have you tried a reset to factory? Then assist to do the basic setup. If you have a spare drive any size Install it as master and see if the snap will setup a new drive. If not you have a HW problem. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820