Pro/Forums - View Single Post - Problems with failure on a 2000 model in mirror mode

blue68f100 · 04-02-2007, 06:45 PM

You can try swapping drive positions. If you have hardware a failure in the snap the only option is another 2000v2, with the same OS version installed in flash. It must be the same OS version, v2 and v3 use a different disk structure. In all of the 2000 I have worked around at least one of the HD would boot the snap. Double check your jumpers, it's the most common mistake. Try with only 1 drive at a time.

OR

If you do not have one, contact Snap-tech for recovery. He should be able to help you.

04-02-2007, 06:45 PM	#15
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Problems with failure on a 2000 model in mirror mode You can try swapping drive positions. If you have hardware a failure in the snap the only option is another 2000v2, with the same OS version installed in flash. It must be the same OS version, v2 and v3 use a different disk structure. In all of the 2000 I have worked around at least one of the HD would boot the snap. Double check your jumpers, it's the most common mistake. Try with only 1 drive at a time. OR If you do not have one, contact Snap-tech for recovery. He should be able to help you. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820