Pro/Forums - View Single Post

blue68f100 · 05-31-2007, 01:19 PM

Re check all of the jumpers on the drives, Drive 1.
All should be set to MASTER or Single Drive.

The error indicates that drive 1 is not mounting.

If it's not a jumper (drive1) swap the drives with another position. If you have different size drives move the smallest to drive 1.

05-31-2007, 01:19 PM	#3
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 14000 Reinstall Re check all of the jumpers on the drives, Drive 1. All should be set to MASTER or Single Drive. The error indicates that drive 1 is not mounting. If it's not a jumper (drive1) swap the drives with another position. If you have different size drives move the smallest to drive 1. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820