Pro/Forums - View Single Post

blue68f100 · 06-01-2007, 06:47 AM

If your are doing this through the Recovery screen, Keyboard and Monitor or RS232 Terminal. It should not make any difference. Unless it does not like the version of Guardian you are trying to install.

You are correct with the Guardian retaining drive setup. Remove the battery for 10 min to have it clear the drive data stored in the unit. Also try using a drive utility to do a quick format, to anything other than Linux. While you have it open reseat the memory and any card that may be in the unit.

What does the insides of a the 14000 looks like???? If you would please post a picture.

And like Phoeninx said see if it works in Cable Select.

Did you have this working before you tried to do a clean install?

06-01-2007, 06:47 AM	#8
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 14000 Reinstall If your are doing this through the Recovery screen, Keyboard and Monitor or RS232 Terminal. It should not make any difference. Unless it does not like the version of Guardian you are trying to install. You are correct with the Guardian retaining drive setup. Remove the battery for 10 min to have it clear the drive data stored in the unit. Also try using a drive utility to do a quick format, to anything other than Linux. While you have it open reseat the memory and any card that may be in the unit. What does the insides of a the 14000 looks like???? If you would please post a picture. And like Phoeninx said see if it works in Cable Select. Did you have this working before you tried to do a clean install? __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 Last edited by blue68f100; 06-01-2007 at 06:54 AM.