Pro/Forums - View Single Post

blue68f100 · 06-05-2007, 04:45 PM

Sys LED blinking quickly twice is normal for startup, performing a disk check. It should do this till it comes on line. If they drives are freshly installed give the unit 10 min to install the OS and start the formatting of the drives. After about 10 min you should be able to connect to the server and complete the setup.

Triple flashing reflects disk activity, System is shutting down.

06-05-2007, 04:45 PM	#3
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 4100 Help Sys LED blinking quickly twice is normal for startup, performing a disk check. It should do this till it comes on line. If they drives are freshly installed give the unit 10 min to install the OS and start the formatting of the drives. After about 10 min you should be able to connect to the server and complete the setup. Triple flashing reflects disk activity, System is shutting down. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820