Pro/Forums - View Single Post

blue68f100 · 07-13-2007, 07:18 PM

If you purchase support you get the latest version 4.0.860. You should have no problem jumping from v3.4. But with any upgrade have your data backed up. Once upgraded or before the ungrade check to see if all of the HD's have the same starting point. This can be different if HD's were replaced, can and will cause problem if you you have a hd failure. A very easy fix if they are not, but requires reformating all HD.

07-13-2007, 07:18 PM	#12
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Calling all Snap 4000 Users... If you purchase support you get the latest version 4.0.860. You should have no problem jumping from v3.4. But with any upgrade have your data backed up. Once upgraded or before the ungrade check to see if all of the HD's have the same starting point. This can be different if HD's were replaced, can and will cause problem if you you have a hd failure. A very easy fix if they are not, but requires reformating all HD. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820