Pro/Forums - View Single Post - HELP - Snap 2000

blue68f100 · 08-13-2007, 06:25 AM

Check your cooling fans and make sure they are working. The 2000v2 are temp controlled by the cpu, most users have set them up to run 24/7. The cpu controls allow the cpu to get real hot before kicking in. Re-seat the ram chip too.

When you swapped HD's, did you break the raid 1 or just installed them (both at the same time) ?

08-13-2007, 06:25 AM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: HELP - Snap 2000 - going into PANIC! Check your cooling fans and make sure they are working. The 2000v2 are temp controlled by the cpu, most users have set them up to run 24/7. The cpu controls allow the cpu to get real hot before kicking in. Re-seat the ram chip too. When you swapped HD's, did you break the raid 1 or just installed them (both at the same time) ? __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820