Pro/Forums - View Single Post

blue68f100 · 10-09-2007, 12:22 PM

Recheck your cables. There are 2 LED's that give you status of the network & activity. If you do not have a solid LINK LED ON you do not have a valid net connection. Make sure you are using a std cat5 cable and not a crossover cable. Unplug the connections and see it it goes out. Better yet use a different port and cable. The Dell Assist will work just fine.

10-09-2007, 12:22 PM	#8
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 2200 driver issues Recheck your cables. There are 2 LED's that give you status of the network & activity. If you do not have a solid LINK LED ON you do not have a valid net connection. Make sure you are using a std cat5 cable and not a crossover cable. Unplug the connections and see it it goes out. Better yet use a different port and cable. The Dell Assist will work just fine. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820