Pro/Forums - View Single Post

blue68f100 · 10-18-2007, 02:08 PM

You will need to wait for Phoenix32 (andy) to answer your question. He is our hardware guy. I believe there is a fuse in the power supply, but andy will know for sure.

As a quick test disconnect ALL drives and see if it boots. You should have access to the admin page. And 4000 have a history of bad power supplies. Make sure all drives are disconnected, other wise you will break your raid set. Not Good.

10-18-2007, 02:08 PM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Need help diagnosing 4000 You will need to wait for Phoenix32 (andy) to answer your question. He is our hardware guy. I believe there is a fuse in the power supply, but andy will know for sure. As a quick test disconnect ALL drives and see if it boots. You should have access to the admin page. And 4000 have a history of bad power supplies. Make sure all drives are disconnected, other wise you will break your raid set. Not Good. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820