Pro/Forums - View Single Post

blue68f100 · 11-08-2007, 04:17 PM

If the unit is not in the enclosure the 1x00 models will over heat. If you have it out there is a ~1" gap between the HD and back of the snap enclosure. If this is not covered the cooling fan will not startup. Due to the placement of the sensor it will not see the heat.

11-08-2007, 04:17 PM	#8
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Replace Drive on 1100 Snap Appliance If the unit is not in the enclosure the 1x00 models will over heat. If you have it out there is a ~1" gap between the HD and back of the snap enclosure. If this is not covered the cooling fan will not startup. Due to the placement of the sensor it will not see the heat. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820