Pro/Forums - View Single Post

blue68f100 · 11-26-2007, 02:55 PM

It appears the bottom drive (10010) in the rack has dropped out of the raid 1 set. This should not have caused the data not to come up, though. Since one is showing a single drive, has me wondering what happen.

I would suggest swapping the drives position and see if it comes back. If it works you will need to resync the drives. The drive info shows both drives working, but with a mirror, and single disk.

Before doing the resync you need to back up the data first.

Does the Disk Utility (gui) show a single bad drive or something else?

11-26-2007, 02:55 PM	#7
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: NO DISK Snap 2200 It appears the bottom drive (10010) in the rack has dropped out of the raid 1 set. This should not have caused the data not to come up, though. Since one is showing a single drive, has me wondering what happen. I would suggest swapping the drives position and see if it comes back. If it works you will need to resync the drives. The drive info shows both drives working, but with a mirror, and single disk. Before doing the resync you need to back up the data first. Does the Disk Utility (gui) show a single bad drive or something else? __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820