Pro/Forums - View Single Post

blue68f100 · 12-08-2007, 01:26 PM

I don't know if you can find the switch. Phoenix32 was looking for one for his. You should beable to test it, and/or bypass using a jumper wire(s). I do not know but I think it's only a std contact that trips a signal on a TTL.

12-08-2007, 01:26 PM	#9
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 1100 Won't Power up I don't know if you can find the switch. Phoenix32 was looking for one for his. You should beable to test it, and/or bypass using a jumper wire(s). I do not know but I think it's only a std contact that trips a signal on a TTL. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820