Pro/Forums - View Single Post

blue68f100 · 12-21-2007, 01:17 PM

Simple, Open the case buy removing the screw in back by the fan. The case will then split. Depending on model (v1 or V2) install the HD as M/S for v1 or CS or M/S for v2.

Depending on how the Network was setup you may need to reset if not DHCP. May need to use Assist to locate and do the initial setup.

Read the FAQ's it will answer most of your questions.

12-21-2007, 01:17 PM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Newbie Needs help with Snap Server 2000 Simple, Open the case buy removing the screw in back by the fan. The case will then split. Depending on model (v1 or V2) install the HD as M/S for v1 or CS or M/S for v2. Depending on how the Network was setup you may need to reset if not DHCP. May need to use Assist to locate and do the initial setup. Read the FAQ's it will answer most of your questions. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820