Pro/Forums - View Single Post - Problems with failure on a 2000 model in mirror mode

blue68f100 · 04-21-2008, 05:15 PM

If your unit was in RAID1, just move the drives over. Or if you want to use the new drives in the new unit. Just move 1 drive, then copy the data over to the new one. Once complete remove your org data drive and reinstall the new drive. If the drive you copied the data over to was in the master position, you can just re-configure the unit for RAID1. It will then mirror the HD.

04-21-2008, 05:15 PM	#19
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Problems with failure on a 2000 model in mirror mode If your unit was in RAID1, just move the drives over. Or if you want to use the new drives in the new unit. Just move 1 drive, then copy the data over to the new one. Once complete remove your org data drive and reinstall the new drive. If the drive you copied the data over to was in the master position, you can just re-configure the unit for RAID1. It will then mirror the HD. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820