Pro/Forums - View Single Post

blue68f100 · 04-23-2008, 05:14 AM

Andy, I think he may have a PS problem and maybe HD issues. Or is this a cable thing compounding the problem.

Are your IDE cables the colored ones with a lead cut?

1000E (drive 2) & 10006 (drive 1) are the drives on the same controller.

The 5% are is where all of the tables are kept on the HD. Problems here generated huge problems. I would run Spinrite on all of the drives. Start in maintance mode, it will switch to recovery if it detects a problem. You may have 1 drive that is causing all of the problems.

Does this bring back old memorides.

04-23-2008, 05:14 AM	#11
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: All shares show unavailable on 4000 Andy, I think he may have a PS problem and maybe HD issues. Or is this a cable thing compounding the problem. Are your IDE cables the colored ones with a lead cut? 1000E (drive 2) & 10006 (drive 1) are the drives on the same controller. The 5% are is where all of the tables are kept on the HD. Problems here generated huge problems. I would run Spinrite on all of the drives. Start in maintance mode, it will switch to recovery if it detects a problem. You may have 1 drive that is causing all of the problems. Does this bring back old memorides. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820