Pro/Forums - View Single Post

blue68f100 · 05-07-2008, 05:00 AM

Maybe this will help http://wiki.procooling.com/index.php...e_LED_Patterns

It's reporting a failure mode or some one put it in reset mode and did not finish the sequence.

Here is the proper reset procedure. h ttp://wiki.procooling.com/index.php/Snap_Server_Resets

I think it looking of a DHCP server and is not finding one. Preform a reset to factory as described above and see if it will come up.

05-07-2008, 05:00 AM	#4
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap server 2200 Maybe this will help http://wiki.procooling.com/index.php...e_LED_Patterns It's reporting a failure mode or some one put it in reset mode and did not finish the sequence. Here is the proper reset procedure. h ttp://wiki.procooling.com/index.php/Snap_Server_Resets I think it looking of a DHCP server and is not finding one. Preform a reset to factory as described above and see if it will come up. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820