Pro/Forums - View Single Post - Snap 1100

blue68f100 · 05-28-2008, 10:32 AM

The v4 upgrade file you have is for upgrading v4.0.830 to 4.0.860. So you must have v4 before it will work. There is a full version of 4.0.860 and Adaptec at times has allowed this out, mainly to one's that have a maintance contract or those who purchase it.

Adaptec has benn distributing v3.4.807 on request. And a few have talked to sales and was able to get it. After telling them that a maintance contract on a EOL product is usless since you have dropped support for this hardware.

05-28-2008, 10:32 AM	#5
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 1100 - Upgrading to OS 4.x The v4 upgrade file you have is for upgrading v4.0.830 to 4.0.860. So you must have v4 before it will work. There is a full version of 4.0.860 and Adaptec at times has allowed this out, mainly to one's that have a maintance contract or those who purchase it. Adaptec has benn distributing v3.4.807 on request. And a few have talked to sales and was able to get it. After telling them that a maintance contract on a EOL product is usless since you have dropped support for this hardware. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820