Pro/Forums - View Single Post

blue68f100 · 06-14-2008, 02:26 PM

Do you have debug access?

IF so use the "co de format 10000/init" to init the drive. If not I would suspect you have a damaged os, or disk.

You can also try reloading the OS using Assist by putting the unit in FLUP mode (5 blink pattern). If you try this have the snap in the FLUP mode atleast 30-45 sec before trying to push the sup down.

06-14-2008, 02:26 PM	#18
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 1100 with no disk found Do you have debug access? IF so use the "co de format 10000/init" to init the drive. If not I would suspect you have a damaged os, or disk. You can also try reloading the OS using Assist by putting the unit in FLUP mode (5 blink pattern). If you try this have the snap in the FLUP mode atleast 30-45 sec before trying to push the sup down. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820