Pro/Forums - View Single Post

blue68f100 · 06-18-2008, 10:34 AM

Power down and unplug it. Give it a few minutes to drain all of the caps. Then open it and insert the ram. Just make sure you do not touch the contacts and use a static strap to make sure you have no static. Nothing is required via software or BIOS.

06-18-2008, 10:34 AM	#5
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Upgrading Ram in a 410 w/Guardian OS 4.4 Power down and unplug it. Give it a few minutes to drain all of the caps. Then open it and insert the ram. Just make sure you do not touch the contacts and use a static strap to make sure you have no static. Nothing is required via software or BIOS. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820