Pro/Forums - View Single Post

blue68f100 · 07-06-2008, 11:07 AM

10000 & 10010 are seperate drives. Share1 (40000) is the raid0 share consisting of 10000 & 10010. So it you want to remove share1 just use the drive utility and remove and or change the config setup.

I do not know what model you are working on but I would recommend that you only use the OS GUI before you break something. Debug cmds are for fixing something that is broke, to correct problems. Not for playing around with, advanced users only.

Read up on the snaps in the FAQ (link in my sig) and the wiki section of this site.

07-06-2008, 11:07 AM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Removing Old Shares 10000 & 10010 are seperate drives. Share1 (40000) is the raid0 share consisting of 10000 & 10010. So it you want to remove share1 just use the drive utility and remove and or change the config setup. I do not know what model you are working on but I would recommend that you only use the OS GUI before you break something. Debug cmds are for fixing something that is broke, to correct problems. Not for playing around with, advanced users only. Read up on the snaps in the FAQ (link in my sig) and the wiki section of this site. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820